Alignment Lasers Introduction

Industrial alignment lasers available with reference dot, line and cross, will provide the most rapid and precise alignment and calibration in textile, paving or mining industry, free wireless communications or sewing etc.
Dot Projecting Alignment Lasers

Dot Projecting Alignment Lasers

Dot Projecting Alignment Lasers

Dot projecting alignment laser is a new type of industrial alignment laser which provide high precision and high accuracy reference dot alignment and calibration for tasks of dot alignment required operation environment. There are red, green, 980nm, and 808nm infrared laser modules what are able to ensure the most convenient and most efficient dot alignment in work.

Red dot projecting alignment laser

This easily available industrial red alignment laser is able to provide moderate accuracy reference on targeted surfaces. Available with the finest 650nm red laser diode and highly reliable circuit board, red dot laser module is able to maintain the most stable and rapid dot alignment in operation.Not as visible as green lasers, red dot alignment laser is enough to project a highly accuracy dot for moderate accuracy alignment work.

Green dot projecting alignment laser

Employed by 532nm green DPSS laser, green dot projecting alignment laser is able to project the best green laser light source with the most visible and brightest green laser beam. The most intense light green dot laser module will project the brightest and most visible green reference dot on targeted surface.

Featured by low beam divergence and good coherence, green dot alignment laser will generate the most stable and visible dot with the smallest light spot on targeted surface in distance. Green dot projecting alignment laser will be greatly applicable for conditions where high level of precision and accuracy point alignment with high light and long distance laser alignment operating environment.

Infrared dot projecting alignment lasers

808nm and 980nm infrared dot alignment lasers are completely different types of laser modules for industrial laser alignment. Infrared lasers project invisible IR laser bean and light spot, fulfill all kinds of infrared light source required alignment tasks. Equipped with special infrared laser equipment, infrared alignment lasers are able to be mounted on instruments to make the most special infrared dot alignment and positioning.

Line Projecting Alignment Lasers

line projecting alignment lasers

Line projecting alignment lasers are great laser alignment tools which provide the most efficient and accurate reference line for tasks of high level of line alignment precision is in need of. There are red, green, and infrared lines generating alignment lasers available from berlinlasers.com.

Red line projecting alignment lasers

Red laser module designed with red reference line projection is able to provide moderate accurate line alignment in operation. Not as visible as green lasers with the same range of output power, red line projecting alignment laser has been enough to be used for alignment operations where moderate accuracy reference line is required.

Employed by the easiest available red laser diode, red laser module can project the most rapid and stable red reference line on targeted surfaces. This industrial designed alignment laser allows continuous 24 hours a day without bring disturbed. The red line generating alignment laser maintains the most stable, reliable performance.

Green line projecting alignment lasers

With the most visible and brightest green light emitting, green line projecting alignment lasers are able to fulfill various line alignment tasks with the highest level of accuracy, precision and working efficient in operation. 532nm green laser is nearly five times as visible as red lasers, green laser module is able to provide the most visible green reference line on targeted surfaces at long distance and even high light environment.

Green laser has featured superiority of good coherence, which is able to achieve the lowest laser beam divergence angle with less than 0.1rad. As a result, green dot projecting alignment lasers assures the most efficient alignment and calibration with the lowest beam divergence in various operation conditions and environments.

Infrared line projecting alignment lasers

The special type of invisible beam infrared line projecting alignment laser fulfill the alignment works where high level accuracy line alignment with infrared light source required work.
Unlike the visible beam lasers, infrared laser module will provide the most convenient, rapid and high efficiency infrared reference line under special equipments. Only professionals are allowed to operate infrared line projecting alignment lasers since invisible IR laser beam will be projected from infrared laser module in operation. Skilled persons should wear laser safety glasses in all kinds of invisible beam alignment.

The above three type of line projecting alignment lasers are able to meet various kinds of line required alignment and calibration. People can choose the most appropriate laser device on basis of exact application.

Cross Projecting Alignment Lasers

cross projecting alignment lasers

Cross projecting alignment laser is a kind of laser module which project the most special reference two perpendicular lines on targeted surfaces within a limited distance. The alignment laser will project cross lines with high accuracy and precision 90 degrees at targeted surfaces or objects.

Red cross projecting alignment lasers

Employed by the finest 650nm laser diode, reliable circuit board, and reasonable inner thermal stabilization system, 650nm Red Cross projecting alignment laser provide the best cross alignment resolution for conditions where moderate level of accuracy and precision cross alignment is in need of.

Not as visible as green lasers to human eyes with same output power, red laser module are able to project clearly visible two perpendicular lines on targeted measuring surfaces in short distance. Mounted on equipments or devices, the Red Cross projecting alignment laser will generate rapid and visible two perpendicular lines with accurate and fixed designed 90 degrees.

Green cross projecting alignment laser

532nm green lasers project the most visible and brightest green laser beam and light spot to human eyes. It is nearly at least five times as visible as red lasers with same range of output power. Green cross projecting alignment lasers are able to provide the most accurate and precise two perpendicular green lines with 90 degrees which are greatly applicable for conditions of high level of accuracy and precision cross alignments are required.

Infrared cross projecting alignment lasers

This special series of infrared cross projecting laser modules are completely different type of alignment lasers which provide invisible infrared cross for conditions of infrared light resources required alignment and calibration. 808nm and 980nm infrared alignment lasers can be mounted on equipment or devices, will project high accuracy infrared cross lines on measured objects.

Infrared lasers are invisible to human eyes, thus infrared cross projecting alignment lasers should only be operated by skilled persons or professionals under special infrared equipment or devices. A pair of laser safety glasses is in need while operating such kind of IR laser modules.

Designed with DC input power supply, all cross projecting alignment lasers are able to be operated in 24 hours continuously with low beam divergence angle, high efficiency and high accuracy. The durable outside aluminum alloy body material and portable designed allow all cross laser modules operated easily and convenient in all kinds of operating fields.