High Fineness Glass Lens Red Cross Laser Alignment

If there is quite serious requirement of highly accurate cross line generation at quite long work distance, formal cross line drawing device such as a square meter or triangular meter is only workable for quite close distance, while not be able to avoid mistake caused by manual operation. Under condition that users are making great work on practically used red cross laser alignment, after perfect equipment with a glass coated lens, it would always make sure of highly accurate and rapid two perpendicular red lines with accurate 90 degrees.

Under condition that red cross laser alignment is being made with import 650nm red laser diode, it is getting improving laser beam stability in long term work. It is getting selectable output power of 5mW to 100mW. Not any longer limited within formal hand reaching, the genuine cross line alignment might be processed at quite long work distance. It is generating highly visible red laser beam at several miles far away, and then obtaining highly fine and accurate cross line generation within the maximum work distance of 25 meters. At the same time, no matter what kind of output power this cross line laser module is selected, it should always avoid operation under sunlight.

In order to make sure of highly clear red cross line generation in use, this red cross laser alignment is giving up the use of formal glass coated lens, but employing even higher quality glass coated lens. When red cross line laser source is generating at quite long work distance, it is still keeping quite high linear quality and also showing clearly, without any worrying about laser light decay or blur in long term use. This laser device is passing through a serious of strict tests, including super rapid electric current adding and up to 24 hours aging preventing test, it is just workable with highly stable red cross line generation within maximum daily operating time of 8 to 10 hours per day.

In order to get quite clear cross line generation on some of hard reaching surface, the genuine use of red cross laser alignment is able to seek help from a laser alignment mounting bracket. Noncontact red cross line source is able to be adjusted easily within 0.3 meter to 3 meters, and then making sure of high speed and high accuracy cross line positioning result on any working surface. In order to achieve free cross line measuring result, users should always wear 635nm wavelength preventing lasersafety goggles and then maintaining the most secured operation constantly.