Adjusted Focus Lens made 5mW to 100mW 650nm Red Laser Diode Modules

What is the best choice to make clear and accurate enough dot measurement? It gets no limitation of real work distance, height and other complex working environments etc, but just makes good job with a direct diode emission made device of 650nm red laser diode module. It is making perfect use of 650nm red laser diode tech, owing to its long developing history and mass production, this finished production of industrial red dot laser always gets strong environmental stabilization, and highly clear red dot alignment at various work distances constantly.

This 650nm red laser diode module is applying for various industrial and high tech dot measuring work fields, it should have to work with good beam stability and highly clear red dot projection in continuous use. The special use of metal heat sink cooling system is configuring with its import 650nm red laser diode. When it gets wide range output power of 5mW to 100mW, in occasion that it gets correct size tube diameter of 16mm and 26mm anodized aluminum alloy housing tube, this red dot laser just achieves good thermal conductivity. When there is enough space and time leaving for tube cooling down, within constant red dot alignment of 8 to 10 hours per day, it is able to work with good laser beam stability, and highly clear red dot measurement at various work distances.

According to the use of qualified glass coated lens, in order to avoid laser light decay or dim, this 650nm red laser diode module is always projecting high intensity and high transmittance red laser light. Before it is available on the laser market, it has just passed through a series of beam stability tests, including super rapid electric current adding test, alternative high and low temperature changing test and up to 24 hours aging preventing test etc. When red dot laser gets proper use by skilled users, after correct use of output power, it is able to make highly clear dot measurement within wide range work distances constantly.

When red laser diode module is operating for various industrial precise dot measuring work fields, it is used as an accessory part. It can be used with special use of a laser alignment mounting bracket and extending electric wires. Within the maximum installed distance of 3 meters, without any barrier of long distance, high height and hard reaching, the compact size tube made red alignment laser allows the most convenient installation and quick red dot projection onto any vertical or horizontal surface. In occasion that it makes use of a high power up to 50mW to 100mW, after correct wearing of laser safety goggles and avoiding eye exposure to beam aperture, it always assures easy and clear dot alignment in all application fields.

The Best Performed 532nm 5mW to 100mW Non Gaussian Beam Green Line Laser Modules

When users are looking for an easy operating and quick response line alignment, not limited by high height, long distance, and other hard reaching places, it is always making good job with a high brightness beam emitting tool of 532nm green line laser module. It is an industrial stabilized laser device, which should have to work with highly clear and fine enough green line generation onto any raw material surface. In occasion that it makes the best use of qualified separate crystal lens with different fan angles, only after its proper installation and adjustment to correct position, this laserline generator always assures high level of accuracy line generation onto all working surfaces constantly.

This 532nm green line laser module is always in need to make long time line alignment, thus it is a key issue to pay attention to its thermal emitting. It is applying advanced 532nm green DPSS laser system within 5mW to 100mW. On consideration of its good beam stability, it is adopting an inner metal heat sink cooling system. After advanced configuration with durable anodized aluminum alloy housing tube, after correct use of 16mm and 26mm diameter, this green alignment laser just leaves enough space for tube cooling down, and achieves highly reliable green line alignment within constant work time of 8 to 10 hours per day.

On basis of the use of qualified separate crystal lens within 10 to 93 degree, no matter what kind of working surface it is pointing, this 532nm green line laser module is performing well with non Gaussian distribution green laser beam. It is also getting the most preferred laser light than formal plastic or glass coated lens, which is just getting the finest and the most visible green reference line in continuous use. It is getting high uniformity green line up to 85%, but also assuring the same line brightness from middle part towards both ends.

Whatever kind of working surface it is pointing, this 532nm green line laser module is performing well with the highest level o accuracy green line projection in multiple application fields. Under basic use of output power and optic lens degree, after its proper adjustment of laser line fineness and line projecting direction, this green alignmentlaser makes sure of easy and precise line generation for laser cutting machine, stone, wood, metal and garment processing, and scientific research work etch. When users are aware of any thermal energy hurt to human eyes and wearing correct laser safety glasses, without any eye exposure to beam aperture, high power green line laser makes easy and safe line alignment in all occasions perfectly.

Long Time Pointing 980nm Separate Crystal Lens Infrared Laser Line Generators

 

Whenever line aligning work is processing under all kind of night version fields, it is not easy to reach with simple manual line drawing device. At the same time, after the use of a long wavelength made device of 980nm infrared laser line generator just makes sure of high quality infrared laser light emission, and highly clear infrared reference line projection under all night version fields. It is performing well with those of night version device, such as CCD camera, black and white camera or infrared laser camera etc. Only if 980nm infrared laser module gets continuous electric power source supply and proper installation onto night version device, it always assures highly clear and fine infrared reference line generation onto desired working surfaces.

This 980nm infrared laser line generator is able to make continuous IR laser line projection. From the very beginning design, it just pays high attention to thermal emitting. The special use of metal heat sink cooling system and import 980nm infrared laser diode are configuring with its durable anodized aluminum alloy housing tube. Whatever kind of working surface it is pointing, even though it is continuing for quite long time, this 980nm infrared laser module is performing well with good thermal emitting, and keeping highly clear infrared line projection within constant work time of 8 to 10 hours per day.

On basis of use of qualified separate crystal lens within 10 to 93 degree, this 980nm infrared laser line generator is performing well with non Gaussian distribution infrared laser beam. It is getting up to 85% uniformity infrared reference line, and also keeping work with the same line brightness from middle part towards both ends. For the most important of all, when 980nm infrared line laser gets proper adjustment of both laser beam focus and line projecting direction within three dimensions, it assures the most efficient IR laser light conversion and increasing fineness infrared line alignment in long time use.

With the assistance of a laser alignment mounting bracket and special use of extending electric wires, without any barrier of long distance or high height, this 980nm infrared laser line generator always enables the most convenient installation, and easy infrared line projection onto any raw material surface. Any time it is projecting invisible infrared laser radiation and reflection, it is a necessity for users to wear correct laser safety goggles and avoiding eye exposure to beam aperture. Only if compact size tube made infrared alignment laser gets proper installation onto desired machine or device, it always assures no track and noncontact line alignment in all application fields perfectly.

The Finest Line of 808nm Separate Crystal Lens infrared Laser Line Generators

 

In various night version line alignment work fields, under constant technical innovation of 808nm infrared laser diode and qualified separate crystal lens, laser tech engineer has developed a quite practically used device of infrared laser line generator. It is performing different from any visible laser devices. It is operating easy and quick, but also getting no limitation of long distance, high height and other complex working environments etc. Whatever kind of night version fields, this infrared laser module enables correct use of optic lens degree and proper mounting onto those of night version device, it assures high efficiency and highly fine infrared line alignment at various work distances.

This 808nm infrared laser line generator always gets constant power source from an AC/DC adapter. It is adopting an import 808nm infrared laser diode within 100mW to 500mW. Comparing with a simple infrared laser pointer, in order to get constant IR laser line projection, it just adopts correct operating voltage of 5V, 9V 1000mA DC power supply. It is performing well with high intensity infrared laser light emission, but also projecting highly clear and fine infrared line alignment at various work distances.

Owing to its invisible infrared laser beam emission, this 808nm infrared laser line generator should only be equipping with night version device of CCD camera, black and white camera or infrared laser camera. It is able to work with high efficiency conversion of a highly fine and clear infrared reference line projection. When it gets freely selected fan angles of 10 to 93 degree, whatever kind of working surface it is pointing, this infrared line laser is performing well with non Gaussian distribution infrared laser beam, and highly uniform IR line projection. It is projecting the same line brightness from middle part towards both ends, but also assuring no decay light IR line alignment for both long time and long distance use.

Whatever kind of night version line aligning work fields, after the use of APC, ACC driving circuit board, 808nm separate crystal lens infrared laser line generator assures constant output power and electric current supply. It is performing well with highly reliable IR line projection, and getting no affect by increasing temperature as well. It enables the maximum operating time of 8 to 10 hours per day. When infrared alignment laser leaves enough space and time for tube cooling system, after correct wearing of infrared laser safety goggles and avoiding eye exposure to beam aperture, it always assures highly secured and fine line alignment permanently.

Increasing Accuracy 5mW 10mW 20mW 30mW 100mW 635nm Red Cross Line Laser Modules

 

Not the same as any manual cross line measuring tool, in order to make clear and quick enough cross line alignment onto various working surfaces, it is always making good job after the use of high purity light emitting too of 635nm red cross line laser module. It is getting at least 3 times brighter red laser light directly than formal 650nm red laser with the same output power. On basis of the use of qualified glass coated lens with different fan angles and constant power source from an external AC/DC adapter, this cross laser alignment easily gets high accuracy and high brightness red cross line source emission at various work distances.

This 635nm red cross line laser module always makes sure of continuous red laser beam emission from beam aperture. It is different from a simple red laser pointer. After giving up the use of formal alkaline battery power source, the genuine use of AC/DC adapter is assuring continuous red laser beam emission and also getting no need to make batter change in continuous cross line measuring work. When it is getting advanced use of import 635nm red laser diode within 5mW to 100mW, it just equips with proper operating voltage of 5V, 9V 1000mA DC power supply. It is emitting highly visible red laser beam, and projecting highly clear red cross line source at various work distances.

After the use of qualified glass coated lens with different fan angles of 10, 15 and 110 degree, no matter what kind of working surface it is pointing, this 635nm red cross line laser module is projecting different dimension red cross line source in continuous use. It is keeping work with high linear quality and high fineness red cross line projection for multiple application fields, including laser alignment for screen printing system, laser medical therapy device, laser car wheel alignment and high tech work etc.

When 635nm red cross line laser module applies a special glass window, no matter what kind of working surface it is pointing, it is getting no affect by any harsh working occasion, such as rain, water, fog or dust etc. At the same time, after its easy screw of adjustable focus optic lens and immediate red laser light concentration, this red alignment laser gets increasing fineness and accuracy cross line alignment in continuous use. For the most important of all, when users are aware of any powerful red laser radiation and thermal energy hurt to human eyes, without any eye exposure to beam aperture, it makes sure of no danger and no manual labor force input cross line alignment in all application fields perfectly.