APC Driving 650nm Red Dot Laser Module

Whenever users are looking for an easy and quick dot positioning result, no matter it is pointing at close distance or long distance, it is never an easy job before selecting a quite professional dot measuring too as expected. The special use of 650nm red dot laser module is performing different from a simple red laser pointer. For instance, on basis of advanced use of import 650nm red laser diode with wide output power range and basic equipment with inner thermal emitting system, it is just forming into an industrial stabilized dot laser alignment.

The genuine dot measuring work should have to be processing onto multiple surfaces, thus should have to get strong industrial stabilization. Employed by high duration aircraft used aluminum alloy housing tube, even though red dot laser module is pointing under mechanical moving or shocking, it is not affecting at all and always keeping highly reliable and stable red reference dot projection in continuous use. Within wide range operating temperature of -10 degree to 45 degree Celsius, red laser alignment is emitting highly intense red laser light and highly clear red dot measurement at various work distances and formal lighting as well.
According to advanced use of qualified glass coated lens and quite strict laser beam stability tests up to 24 hours, 650nm red dot laser module is assuring high transmittance red laser light emission and highly clear red reference dot positioning result in distance. It is a quite strict laser beam stability tests passing dot laser alignment. Every time it is passing through a series of tests, including super rapid electric current adding test, alternative high and low temperature changing test and up to 24 hours aging preventing test, it is always working with excellent laser light cycling use and no decay light dot positioning results on all surfaces.
Under advanced use of APC, ACC driving circuit board, whatever kind of output power it is selecting, 650nm red dot laser module keeps work with constant output power and electric current supply, always maintaining up to 85% beam stability under constant work of 8 to 10 hours. When high power alignment laser is operating at quite long distance, it is projecting serious intense thermal energy from beam aperture. It is a key issue to be aware of any laser radiation and thermal hurt to human eyes, only after correct wearing of laser safety goggles, it gets highly satisfied and precise dot alignment on all surfaces constantly. 

Pure Light 635nm Red Line Laser Module

If users are looking for quite easy and convenient line alignment at various work distances, any manual line printing or line drawing work is not helpful at all. In current precise line alignment work fields, it should be quite nice substitute for users to try 635nm red line laser module. It projects high purity red laser light and low beam divergence laser beam from 635nm red laser diode. When industrial stabilized laser line generator selects qualified glass coated lens or separate crystal lens with different fan angles, only if it gets correct use of DC power supply and proper adjustment onto correct position, it just makes easy and highly clear red reference line projection onto multiple targeting surfaces successfully.

This 635nm red line laser module gets unique use of import 635nm red laser diode. It is different from a simple red laser pointer. In order to get super strong industrial stabilization, according to quite special use of inner metal heat sink cooling system inside metal housing tube, the genuine red laser line alignment is workable with superior nice thermal emitting and increasing stability in continuous use. When it gets wide range output power of 5mW to 100mW, it just adopts different size tube diameter of 16mm and 26mm. Only if this red laser line generator gets sufficient space for thermal emitting, it is able to work with high stability red line projection in continuous use.
Whenever 635nm red line laser module is trying to work for multiple application fields, it should have to work with extremely fine and clear line generation. The special adoption of qualified glass coated lens or separate crystal lens makes great job to obtain high linear quality red line in use. In addition, once it is trying to work for quite long time, owing to its strict beam stability tests up to 24 hours, this line laser alignment just keeps work with superior nice laser light cycling use and extremely clear and stable red line projection.
Every time users are getting basic measurement of line length, line fineness and work distance, 635nm red line laser module would get correct output power and fan angle, achieving quite satisfied line positioning result within the maximum work distance of 25 meters and high lighting occasions. The advanced use of APC, ACC driving circuit board protects alignment laser from overheating and over current, just assuring highly reliable line positioning result within 8 to 10 hours continuous use and long lifetime. When users are paying high attention to laser safety issue and wearing correct laser safety goggles, high power red laser alignment just achieves easy and safe measurement constantly.

Glass Coated Lens 515nm Green Laser Line Generator

In order to get clear enough line alignment at quite long work distance, not workable at all to only rely on manual line drawing or line printing work, it is much better solution to make advanced use of a 515nm green laser line generator. It is a great technical innovation of 515nm green laser diode tech, which is just a quite successful finished production of bare laser diode. It is generating intense and bright forest green laser light directly from 515nm green laser diode, after its advanced use of inner cooling system and qualified glass coated lens with different fan angles, this 515nm green line laser is workable with extremely stable and clear forest green laser line projection in distance effectively.

In various industrial and high tech line aligning work fields, 515nm green laser line generator would have to work for quite long time and maintain good laser beam stability. Comparing with formal 532nm green DPSS laser, within wide range output power of 5mW to 50mW, this 515nm green laser module just adopts quite small size tube diameter of 16mm and 26mm. The advanced use of high duration aircraft used aluminum alloy housing tube just contains enough space leaving for inner metal heat sink cooling system. Even though green laser light is quite sensitive to working environments, however, the genuine green laser line alignment is bearing -10 degree to 45 degree Celsius operating temperature.
On basis of special use of electric wires extension for both 515nm green laser line generator and DC power supply, within freely installed distance of 3 meters, noncontact green line is easy to reach any vertical or horizontal surface. For the most important of all, whenever the most powerful green laser light is generated from beam aperture, however, the genuine green laser line alignment is preventing any overheating and over current impact, but just maintaining the most stable forest green line projection in multiple occasions.
Whenever 515nm green laser line generator is pointing onto various targeting surfaces, the special use of glass coated lens enables freely selected fan angles within 10 degree to 110 degree. It gets quite special use of glass window in front of laser beam aperture, without any affecting by moisture or dust, it is working with highly clear and stable line generation. Under the most important design of adjustable focus optics, once the most intense and powerful green laser light is focusing, this alignment laser just achieves super fine line generation within the maximum distance of 25 meters. Only if users are paying special attention to thermal hurt to eyes and wearing correct laser safety glasses, this industrial stabilized green line laser achieves easy and clear line measurement continuously.

Glass Lens Made 635nm Red Laser Line Generator

When users are making great work on industrial stabilized line device, such as a 635nm red laser line generator, it is just a quite easy and efficient solution to make highly clear and fine enough line alignment onto various targeting surfaces. It generates high purity and highly bright red laser light from 635nm red laser diode, which is projecting at least 3 times brighter red laser light than formal 650nm red laser diode. When red line laser gets basic use of inner cooling system and qualified optic lens with different fan angles, it is workable with extremely fine and accurate enough redline alignment onto multiple targeting surfaces.

This 635nm red laser line generator enables quite easy use while comparing with any other manual or mechanical line aligning tools. It is employing import 635nm red laser diode as its beam emitting source. Owing to its quite low laser beam divergence of less than 1mard, when red laser line alignment is processing at quite close distance of 10cm, it is only getting 0.3mm line fineness, and extremely fine red line of only 1mm to 2mm fineness at 2 meters work distance. In formal line aligning work, within the maximum line alignment work distance of 25 meters, red laser module is able to work with fine and straight line generation, without any appearance of laser light decay or dim in continuous use.
In multiple line alignment work fields, 635nm red laser line generator gets quite strict requirement of line fineness and line straightness onto multiple targeting surfaces. The superior use of qualified glass coated lens assures high linear quality and high straightens red reference line projection. In addition, available with wide range fan angles of 10 degree to 110 degree, red laser line is obtaining different line lengths onto various targeting surfaces. For the most important of all, after quite easy screw of adjustable focus optics, whenever highly intense and powerful red laser light is focused, this red line laser achieves extremely fine red line targeting onto all targeting surfaces.
When 635nm red laser line generator selects compact size tube of 16mm and 26mm, within wide range output power of 5mW to 100mW, it is always making highly intense red laser light emission and highly clear red line alignment onto multiple targeting surfaces. The important design of APC, ACC driving circuit board is preventing any increasing temperature and serious electric current impact, achieving extremely stable line alignment within continuous use of 8 to 10 hours and long lifetime. Any time users are paying high attention to laser safety issues and wearing correct laser safety goggles, this alignment laser achieves easy and clear measurement constantly.

Quick Response 100mW Blue Line Laser Module

When users are not able to make immediate line alignment at quite long work distance, it is not workable at all to still rely on manual line printing works. At the same time, after advanced use of 445nm blue laser diode and basic technical innovation of thermal emitting system and qualified optic lens with different fan angles, this laser line generator is always getting super strong environmental stabilization. According to quite easy installation and adjustment to correct position, it just achieves high fineness and quick response line alignment at great distance.

The real line alignment with 100mW blue line laser module has to continue for quite long time. Comparing with a simple blue laser pointer, it gets external AC/DC adapter as its beam emitting source. Accepting wide range electric current within 100V to 240V, it is keeping highly intense blue laser light emission and highly clear blue reference line projection in continuous use. For the most important of all, every time this line laser alignment gets extending electric wires for both blue laser tail part and DC power source, it just allows convenient use within the maximum installation distance of 3 meters and easy line projection onto any vertical and horizontal surface.
Whatever kind of working surface it is pointing, under operation with the clearest line alignment at quite long work distance, 445nm 100mW blue line laser module is giving up the use of formal plastic coated lens. It generates high straightness and high linear quality blue laser line from beam aperture, not appearing with any laser light decay or blur in continuous use. In order to get the clearest line alignment onto multiple targeting surfaces, the genuine blue laser line alignment enables freely selected fan angles from 10 degree to 110 degree. When users are getting basic learning of line length, line fineness and work distance, after basic measurement and experiment, a correct fan angle made laser line generator just makes sure of extremely fine line generation in distance.
Any time 100mW 445nm blue line laser module is operating as an accessory part, after special use of a laser alignment mounting bracket, it is making quite convenient and non contact blue reference line projection at great distance. According to quite easy screw of adjustable focus optics, once the most powerful blue laser light is focusing, this alignment laser always makes the finest line generation in distance. It is just a key issue to avoid eye exposure to laser beam aperture and wear correct laser safety goggles until achieving easy and clear measurement constantly.

Easy Used 10mW 532nm Green Laser Diode Module

What is the best solution to make easy and clear dot alignment in distance? On consideration of low time consumption and reduced relying on manual labor force input, it is becoming a more and more popular solution to make use of 10mW 532nm green laser diode module. It projects highly bright and visible green laser light from middle wavelength of 532nm green DPSS laser system. Any time it gets basic use of thermal emitting system and easy use of an external electric power source, this industrial stabilized green dot laser is just keeping work with highly stable and accurate green reference dot projection onto multiple targeting surfaces effectively.

This 10mW 532nm green laser diode module enables convenient use in any work field. It is projecting similar green laser beam and green laser dot as a simple green laser pointer. However, not simple stopping in mind of temporary dot positioning work, this green dot laser gets inner design of metal heat sink cooling system inside its durable aircraft used aluminum alloy housing tube. In continuous green reference dot projection, it achieves superior nice thermal emitting and super strong environmental stabilization. Usually within wide range operating temperature of -10 degree to 45 degree Celsius, green dot projection is keeping highly clear and visible beam emitting, applying for multiple application fields effectively.
Designing with the most qualified glass coated lens, without any worrying about laser light decay or blur in continuous use, 10mW 532nm green laser diode module keeps work with high transmittance green laser light emission. It should always maintain good laser light cycling use. As a result, before this alignment laser is available on the market, it passes through quite strict laser beam stability tests up to 24 hours. A series of strict tests, including super rapid electric current adding test, up to 24 hours aging preventing test and alternative high and low temperature changing test, under continuous green laser dot alignment within 8 to 10 hours, green dot laser is keeping stable beam emission and highly clear dot alignment in all occasions.
Any time 10mW 532nm green laser diode module gets easy screw of adjustable focus, after immediate green laser light concentration, it makes sure of quick response and the most compact size green reference dot projection. Whatever kind f working surface, being used as an accessory part and together with a laser alignment mounting bracket, noncontact green alignment laser dot is always easy to reach any vertical or horizontal surface. Any time users are paying special attention to thermal hurt to human eyes, users should select correct laser safety glasses until achieving safe and free use constantly.